StewartJ. 591 posts · Joined 2009. #13 · Feb 16, 2012. Temperature sensor and readout fitted today and it was relatively easy, the thin cable for the sensor is over 2 metres in length and has a sticky fixing pad attached to it. The unit requires a single AAA battery which is not supplied.
Temperature sensor: What is the best brand for the FIAT Ducato II Platform/Chassis (244) 2.8JTD 2001 - 2006 128hp / 94kW? The best brands for the FIAT Ducato II Platform/Chassis (244) 2.8JTD 2001 - 2006 128hp / 94kW in the category Temperature sensor are: RIDEX; FEBI BILSTEIN; TOPRAN; BOSCH; METZGER
I see on the last @HughJampton post the connector number - the one located under the driver's step. Thanks That's helpful. I've ordered another loom that has connectors for the temperature sensor and folding + power mirrors, but apparently it's the right side one, though LHD. Have to find the left side now to check everything will be working fine.Location. Chester. Aug 20, 2023. #3. In general it is often not the sensor but the toothed reluctor ring. They can crac or rust. It is easy to test the sensor. Put your meter into OHMS function at the sensor pickup and at the end of the first join in the cable as it joins the loom or Abs circuit. If it shows an open circuit reading it's OK.
This could be due to leaking, low, or dirty fluid, or a bad sensor P0710 FIAT Description The Automatic Transmission (A/T) fluid temperature sensor detects the A/T fluid temperature and sends a signal to the Transmission Control Module (TCM). Had a suggestion from HonestJohn , it could be the faulty temperature sensor.
When your cars not running right, not starting, fans coming on when cool, then test your coolant temperature sensor, it could of be your problem. A great diakAtG. 110 53 293 210 243 366 40 51 146